Installing The Analog Input Layer - Barco Galaxy NH-12 Service Manual

7. Electronic parts and servicing procedures
Image 7-75
Analog input layer: front screws
3. Remove the side screw, fixing the analog input layer to the PMP
Image 7-76
Analog input layer: side screw
4. Disconnect the board-to-board connectors to remove the analog input layer from the PMP
Image 7-77
Analog input layer: unplug the board-to-board connectors to remove
7.7.4.1.3

Installing the analog input layer

Necessary tools
Torx screwdriver T10
How to install the analog input layer?
1. Make the board-to-board connection between analog input layer and PMP
74 R59770141 GALAXY NH-12 20/02/2008