Removing The Pmp - Barco Galaxy NH-12 Service Manual

number LED ID
4 D22
5 D23
6 D24
7 D25
8 D26
9 on J11
10 on J11

7.11.3 Removing the PMP

Necessary tools
Torx screwdriver T10
How to remove the PMP?
1. Remove the input module (see concerning chapter)
2. Remove both screws fixing the PMP to the front plate
Image 7-124
PMP: front fixing screws
3. Remove the side screws fixing the input boards to the PMP
Image 7-125
PMP: side screws fixing the input boards
4. Disconnect the PMP from the inputs by unplugging the board-to-board connectors
R59770141 GALAXY NH-12 20/02/2008
color description
green
POWER +3.3V
green
POWER –5V
green
POWER +5V
green
blinks (f = 1Hz) if the projector is running
red
on in case of any problem inside the projector
yellow ethernet link established
green
ethernet activity
7. Electronic parts and servicing procedures
95