Installing The Dvi / D15 Input Layer - Barco Galaxy NH-12 Service Manual

Image 7-83
DVI / D15 input layer: side screw
4. Disconnect the board-to-board connectors to remove the DVI / D15 input layer from the PMP
Image 7-84
DVI / D15 input layer: unplug the board-to-board connectors to remove
7.7.4.2.3

Installing the DVI / D15 input layer

Necessary tools
• Torx screwdriver T10
• Nut spanner 3/16" or 4,5 mm
How to install the DVI / D15 input layer?
1. Make the board-to-board connection between DVI / D15 input layer and PMP
Image 7-85
DVI / D15 input layer: plug in the board-to-board connectors
2. Fix the DVI / D15 input layer to the PMP using a screw
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
77