Software; Projector Software (Firmware); Description Of The Projector Software (Firmware); Projector Software Version - Barco Galaxy NH-12 Service Manual

5. SOFTWARE

Overview
• Projector software (firmware)
• Desktop Integration software
5.1 Projector software (firmware)
Overview
• Description of the projector software (firmware)
•

Projector software version

•

Upgrading the projector software

5.1.1 Description of the projector software (firmware)
Description
The projector software consists out of different parts:
• projector application
• FPGA configurations
• operating system (eCos)
• boot loaders
• drivers and firmware
The projector software can be upgraded: one single executable file is used as an upgrade tool. This Windows application uploads
the new software, file by file, and verifies that each upload is successful.
5.1.2 Projector software version
Necessary tools
No tools.
How to display the projector software version?
1. Press MENU to activate the tool bar
2. Press → to select General
3. Press ↓ to drop down the General menu
4. Use ↓ to select Identification
5. Press ENTER
In the appearing window, the projector software version is mentioned.
5.1.3 Upgrading the projector software
Upgrade tool
The name of the upgrade tool is according to this format:
iCon NH- 12 v00.10.0001.exe
device
Image 5-1
Upgrade tool
Two main parts can be seen:
R59770141 GALAXY NH-12 20/02/2008
version
5. Software
31