Projector Parts And Functions; Front View; Rear View - Barco RML W6 User Manual

2

Projector parts and functions

Front view

Adjustable foot
Adjust the height and angle
of the projector with the
adjustable foot
Ventilation inlet
The internal cooling fan draws
cool air from the ventilation
inlet into the projector.
Adjustable foot

Rear view

Ventilation
slot
The hot air generated
inside the projector is
dispersed through the
ventilation slot. Make
sure the ventilation
slot is free from
obstruction.
A d j u s t a b l e
foot
Lamp cover
A d j u s t a b l e
foot
▲▼ bottons
Use these buttons to scroll,
configure or adjust items on
the OSD or toggle between
different images.
Displays or hides the OSD
adjustment screen
Displays the projector's power
ERROR
Displays the cause of problem
(i.e. temperature, fan, lamp
or system) that has led to
projector malfunction.
10
Downloaded From projector-manual.com Barco Manuals
MENU
MENU
POWER
ON ERROR
status
INPUT
STBY
ENTER
STAND BY
LED STATUS
Infrared
receiver
Lens
Lens
cover
P r o j e c t o r
buttons
Power
inlet
Power
switch
I  ON
O  OFF
Infrared
sensor
INPUT
Used to toggle between different
input signal source
Refer to Chapter VI  Signal
Source Selection for more details
STBY
Use this button to start up or shut
down the projector .
STAND BY
The indicator that shows the
projector's standby status.
ENTER
Press this button to confirm
selection of OSD item; you can
choose from "Select Item" or
access "Sub Menu" configurations.