Flow Control; Operating With A Front Loader; Remote Valve Couplers - New Holland T6010 Operator's Manual

SECTION 3 - - FIELD OPERATION

Flow Control

The flow control valve (1), meters the flow of oil to the
remote cylinder and thus controls the rate of
response of the cylinder. Rotate the flow control
anti--clockwise to increase the oil flow to the
implement, rotate clockwise to reduce the oil flow.
For flow rates, see Section 8 -- Specifications.
109

Operating with a Front Loader

If your tractor is fitted with a non New Holland front
loader, the rear remote valves may be used to
provide the hydraulic power.
For loader control it is recommended that remote
valves 1 and 2 are fitted with a joystick and converted
to non detent operation (position 1 with adjustable
detents).
See Accessories, Section 7 for details on Zero
Detent kits for non adjustable remote valves
110

Remote Valve Couplers

Each remote control valve has a pair of 1 in.
/
2
quick-disconnect, female couplers. These are of a
self--sealing/locking design but will allow remote
cylinder hoses to pull free if the implement should
become disconnected from the tractor. The raise (lift)
coupler (1), is on the left--hand side, the lower (drop)
coupler (2), on the right--hand side.
The flip--up covers are colour coded black, brown,
blue and green to corresponding to the control levers
in the cab.
111
3--63