Uncoupling Implement From Tractor - New Holland T6010 Operator's Manual

The top link is connected to the bracket with the pin
(2) secured by the spring pin. Two holes are provided
in the top link bracket for location of the top link. Use
the top hole (1), as shown, for maximum lift capacity.
Use the lower hole (3), to provide the greatest
implement height, when raised.

Uncoupling Implement from Tractor

Using the remote lever or joystick, lower the
implement to the ground, ensuring that it cannot fall
when disconnected from the front hitch. Use the
implement supports (where fitted).
Pull back the lever on the top link to release the claw
from the implement upper hitch pin.
Pull the ring (1) on both lower links fully rearwards.
The lever will lock in position with the latch retracted.
This will allow the links to clear the ball-bushings on
the implement lower hitch pins when the links are
lowered fully.
Fully lower the lower links using the remote lever or
joystick and reverse the tractor clear of the
implement.
3--40
SECTION 3 - - FIELD OPERATION
65
66