Additional 40 Amp Socket; Auxiliary Headlights - New Holland T6010 Operator's Manual

ADDITIONAL 40 AMP SOCKET

A second 4--pin, 40 amp socket is available as a
dealer installed accessory. The socket is mounted on
the underside of the lower, right-hand windscreen
frame.
A 4--pin to SAE 3--pin adaptor cable is available as
an accessory from your dealer. (See Figure 2).
4- -PIN TO 3- -PIN ADAPTOR
A 4--pin to SAE 3--pin adaptor cable is available as
an accessory from your dealer. The adaptor may be
used with the 4--pin, 40 amp implement socket.

AUXILIARY HEADLIGHTS

A set of additional dipping headlights are available for
use with front mounted equipment. Located on the
upper right and left--hand grab rails, the headlight
beams pass over front mounted equipment to
illuminate the road ahead.
To turn on the auxiliary headlights, depress the
switch on the lower left side of the instrument panel.
Wnen switched on the auxiliary headlight beams
may be dipped using the multi--function switch on the
left of the steering column.
SECTION 7 - - ACCESSORIES
2
3
7--3