Operating The Front Linkage - New Holland T6010 Operator's Manual

FRONT THREE- -POINT HITCH
(where fitted)
The optional front hitch consists of an adjustable top
link (1) and a pair of folding lower links (2). The top
link and the lower links have open claw ends that
permit rapid coupling and uncoupling of implements.
The claws are equipped with self-locking latches to
ensure positive retention of the tractor linkage to the
implement.
Three ball-bushings are supplied for installation on the
implement, if required.

Operating the Front Linkage

The front hitch may be controlled through the rear
remote valves, or by a dedicated mid-mounted twin
spool remote valve.
- - with mechanical rear remote valves:
Using valves I or II at the rear of the tractor, operation
of the front hitch may be controlled via the remote
valve levers.
With the front linkage connected to valve number I,
pull the lever rearwards (R) to raise the front linkage.
Move the lever to (N) to halt linkage movement, the
linkage will maintain its height position. Select (L) to
lower the linkage. With the lever in the float position
(F), the linkage can move up and down (float)
allowing the implement to follow the ground
contours.
3--34
SECTION 3 - - FIELD OPERATION
49
50
51