TRANSMISSION - - SYNCHRO COMMAND
PROBLEM
High
transmission
operating
tempera-
ture
Noisy transmission
Gear
engagement
difficult
Jumping out of gear
Holding in gear
SECTION 5 - - FAULT FINDING
POSSIBLE CAUSE
Low oil level.
Incorrect oil grade/viscosity.
Dirty or blocked transmission
oil cooler.
Low oil level.
Incorrect oil grade/viscosity.
Worn bearings or failed parts.
Incorrect linkage adjustment or
worn linkage.
Worn shift forks/selectors.
Worn bearings.
Air in hydraulic clutch system.
Incorrect linkage adjustment or
worn linkage.
Worn shift forks/synchronisers.
Worn bearings.
Faulty detents.
Incorrect linkage adjustment or
worn linkage.
Worn couplers.
CORRECTION
Add oil, as required.
Drain and refill with oil of the correct
specification.
Clean.
Add oil, as required.
Drain and refill with oil of the correct
specification.
See your authorised dealer.
Adjust linkage, replace worn parts or
see your authorised dealer.
See your authorised dealer.
See your authorised dealer.
Bleed system or see your authorised
dealer.
Adjust linkage, replace worn parts or
see your authorised dealer.
See your authorised dealer.
See your authorised dealer.
Replace detent balls and springs or see
your authorised dealer.
Adjust linkage, replace worn parts or
see your authorised dealer.
See your authorised dealer.
5--5