Speed Matching - New Holland T6010 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION

Speed Matching

Speed matching will normally only permit a downshift
to a lower gear. It will however, select a higher gear
if the the engine attempts to overspeed.
When travelling on the road in High range, gears 13
to 16, the transmission will automatically select a
gear to match engine speed to road speed if the
following method is adopted:
To downshift: Decrease engine speed, depress the
clutch pedal while simultaneously increasing engine
speed by pressing the foot throttle further down.
When the clutch pedal is released, the transmission
will automatically select a lower gear (provided 13th.
speed is not already selected) matching engine
speed to road speed.
NOTE: When operating in Auto Shift high range, the
lowest downshift gear will become 9th, see text on
Auto Shift.
In high range, the operator can manually select
another gear without affecting the speed matching
function.
With the range lever placed in low, speed matching
will operate down to 5th gear.
NOTE: The speed matching function will be disabled
if the operator manually selects a gear when in the
low range.
2--91