New Holland TD65F Service Manual
  1. Manuals
  2. Brands
  3. New Holland Manuals
  4. Tractor
  5. TD65F
  6. Service manual

New Holland TD65F Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
TD65F / TD75F / TD85F
Tractor
Part number 84574094A
English
February 2017
Copyright © 2017 CNH GLOBAL N.V. All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for New Holland TD65F

Summary of Contents for New Holland TD65F

  • Page 1 SERVICE MANUAL TD65F / TD75F / TD85F Tractor Part number 84574094A English February 2017 Copyright © 2017 CNH GLOBAL N.V. All Rights Reserved.
  • Page 2 SERVICE MANUAL TD65F Without cab, 12x12, TD65F Without cab, 20x12, TD65F Without cab, 12x12, Semi Knock-Down Argentina, TD65F Without cab, 20x12, Semi Knock-Down Argentina, TD75F Without cab, 12x12 , TD75F Without cab, 20x12, TD75F Without cab, 12x12, Semi Knock-Down Argentina, TD75F...
  • Page 3 Contents INTRODUCTION Engine..................10 [10.001] Engine and crankcase ............. 10.1 [10.106] Valve drive and gears .
  • Page 4 Front axle system ............... 25 [25.100] Powered front axle ..............25.1 [25.102] Front bevel gear set and differential .
  • Page 5 [41.206] Pump ................41.1 [41.216] Cylinders .
  • Page 6 INTRODUCTION 84574094A 19/10/2016 Find manuals at https://best-manuals.com...

  • Page 7: Table Of Contents

    Contents INTRODUCTION International symbols (*) ............... . 3 Foreword - Important notice regarding equipment servicing (*) .

  • Page 8: International Symbols

    INTRODUCTION International symbols TD65F TD75F TD85F As a guide to the operation of the machine, various universal symbols have been utilized on the instruments, controls, switches, and fuse box. The symbols are shown below with an indication of their meaning.

  • Page 9: Foreword - Important Notice Regarding Equipment Servicing

    Specifications, descriptions, and illustrative material herein are as accurate as known at time of publication but are subject to change without notice. In case of questions, refer to your NEW HOLLAND Sales and Service Networks. 84574094A 19/10/2016...

  • Page 10: Foreword - How To Use And Navigate Through This Manual

    INTRODUCTION Foreword - How to use and navigate through this manual TD65F Without cab, 12x12 TD65F Without cab, 20x12 TD75F Without cab, 12x12 TD75F Without cab, 20x12 TD85F Without cab, 12x12 TD85F Without cab, 20x12 This manual has been produced by a new technical information system. This new system is designed to deliver technical information electronically through web delivery (eTIM), DVD, and paper manuals.
  • Page 11 INTRODUCTION Manual content This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the end of each Chapter.
  • Page 12 INTRODUCTION 61 - Metering system 62 - Pressing - Bale formation 63 - Chemical applicators 64 - Chopping 66 - Threshing 68 - Tying/Wrapping/Twisting 69 - Bale wagons 70 - Ejection 71 - Lubrication system X X X X X 72 - Separation 73 - Residue handling 74 - Cleaning...
  • Page 13 INTRODUCTION Chapters Each Chapter is identified by a number e.g. Engine - Engine and crankcase - 10.001. The first number is identical to the Section number i.e. Chapter 10.001 is inside Section 10, Engine. The second number is representative of the Chapter contained within the Section.
  • Page 14 INTRODUCTION Information units and information search Each chapter is composed of information units. Each information unit has the SAP code shown in parentheses. This indicates the function and type of information in that information unit. Each information unit has a page reference within that Chapter.

  • Page 15: Safety Rules

    INTRODUCTION Safety rules TD65F TD75F TD85F PRECAUTIONARY STATEMENTS Personal Safety Throughout this manual and on machine signs, you will find precautionary statements ("DANGER", "WARNING", and "CAUTION") followed by specific instructions. These precautions are intended for the personal safety of you and those working with you.

  • Page 16: Safety Rules

    2. Use an approved roll bar and seat belt for safe operation. Overturning a tractor without a roll bar can result in death or injury. If your tractor is not equipped with a roll bar and seat belt, see your NEW HOLLAND Dealer.
  • Page 17 Always sit in the tractor seat when starting the engine or operating controls. Do not start the engine or operate controls while standing beside the tractor. Do not bypass the neutral start switches. Consult your NEW HOLLAND Dealer if your neutral start controls malfunction. Use jumper cables only in the recommended manner. Improper use can result in tractor runaway.
  • Page 18 Wipe up spilled fuel immediately. Always tighten the fuel tank cap securely. If the original fuel tank cap is lost, replace it with a NEW HOLLAND approved cap. A non-approved, proprietary cap may not be safe. Keep equipment clean and properly maintained.
  • Page 19 INTRODUCTION • Attempt to straighten or weld any part of the main frame or retaining brackets which have suffered damage. Doing so may weaken the structure and endanger your safety. • Secure any parts on the main frame or attach your safety frame with anything other than the special high tensile bolts and nuts specified.
  • Page 20 Improper disposal of batteries can contaminate the soil, groundwater, and waterways. NEW HOLLAND strongly recommends that you return all used batteries to a NEW HOLLAND dealer, who will dispose of the used batteries or recycle the used batteries properly. In some countries, this is a legal requirement.
  • Page 21 INTRODUCTION Safety rules TD65F Without cab, 12x12 TD65F Without cab, 20x12 TD75F Without cab, 12x12 TD75F Without cab, 20x12 TD85F Without cab, 12x12 TD85F Without cab, 20x12 Personal safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible death or injury.

  • Page 22: Basic Instructions Hardware

    Overlay Hardware used on New Holland balers is plated with zinc chromate (gold color). Gold colored hardware has different torquing requirements from unplated or zinc plated (silver color) hardware because of the difference in the coefficient of friction of the plating material.

  • Page 23: Basic Instructions - Shop And Assembly

    Only use CNH Original Parts or NEW HOLLAND Original Parts. Only genuine spare parts guarantee the same quality, duration, and safety as original parts, as they are the same parts that are assembled during standard production. Only CNH Original Parts or NEW HOLLAND Original Parts can offer this guarantee.
  • Page 24 W0111A Special tools The special tools that NEW HOLLAND suggests and illustrate in this manual have been specifically researched and designed for use with NEW HOLLAND machines. The special tools are essential for reliable repair operations. The special tools are accurately built and rigorously tested to offer efficient and long-lasting operation.

  • Page 25: Torque - Minimum Tightening Torques For Normal Assembly

    INTRODUCTION Torque - Minimum tightening torques for normal assembly TD65F Without cab, 12x12 TD65F Without cab, 20x12 TD75F Without cab, 12x12 TD75F Without cab, 20x12 TD85F Without cab, 12x12 TD85F Without cab, 20x12 METRIC NON-FLANGED HARDWARE NOM. LOCKNUT LOCKNUT SIZE CL.8...
  • Page 26 INTRODUCTION METRIC FLANGED HARDWARE NOM. CLASS 8.8 BOLT and CLASS 10.9 BOLT and LOCKNUT LOCKNUT SIZE CLASS 8 NUT CLASS 10 NUT CL.8 CL.10 W/CL8.8 W/CL10.9 BOLT BOLT PLATED PLATED UNPLATED UNPLATED W/ZnCr W/ZnCr 2.4 N·m (21 lb 3.2 N·m (28 lb 3.5 N·m (31 lb 4.6 N·m (41 lb 2.2 N·m (19 lb...
  • Page 27 INTRODUCTION 1. Manufacturer's Identification 2. Property Class 3. Clock Marking of Property Class and Manufacturer's Identification (Optional), i.e. marks 60 ° apart indicate Class 10 properties, and marks 120 ° apart indicate Class 8. INCH NON-FLANGED HARDWARE LOCKNUT LOCKNUT NOMINAL SAE GRADE 5 BOLT SAE GRADE 8 BOLT GrB W/ Gr5...
  • Page 28 INTRODUCTION INCH FLANGED HARDWARE NOM- LOCKNUT LOCKNUT SAE GRADE 5 BOLT and SAE GRADE 8 BOLT and INAL GrF W/ Gr5 GrG W/ Gr8 SIZE BOLT BOLT UNPLATED PLATED UNPLATED PLATED or PLATED W/ZnCr or PLATED W/ZnCr SILVER GOLD SILVER GOLD 12 N·m (106 lb 13 N·m (115 lb...
  • Page 29 INTRODUCTION Inch Lock Nuts, All Metal (Three optional methods) 20090268 Grade Identification Grade Corner Marking Method (1) Flats Marking Method (2) Clock Marking Method (3) Grade A No Notches No Mark No Marks Grade B One Circumferential Notch Letter B Three Marks Grade C Two Circumferential Notches...

  • Page 30: Torque - Standard Torque Data For Hydraulics

    INTRODUCTION Torque - Standard torque data for hydraulics TD65F Without cab, 12x12 TD65F Without cab, 20x12 TD75F Without cab, 12x12 TD75F Without cab, 20x12 TD85F Without cab, 12x12 TD85F Without cab, 20x12 Installation of adjustable fittings in straight thread O-ring bosses 1.
  • Page 31 INTRODUCTION Pipe thread fitting torque Thread size Torque (maximum) 1/8-27 13 N·m (10 lb ft) Before installing and tightening pipe fittings, clean the 1/4-18 16 N·m (12 lb ft) threads with a clean solvent or Loctite cleaner and apply 3/8-18 22 N·m (16 lb ft) sealant L ®...
  • Page 32 SERVICE MANUAL Engine TD65F Without cab, 12x12, TD65F Without cab, 20x12, TD65F Without cab, 12x12, Semi Knock-Down Argentina, TD65F Without cab, 20x12, Semi Knock-Down Argentina, TD75F Without cab, 12x12 , TD75F Without cab, 20x12, TD75F Without cab, 12x12, Semi Knock-Down Argentina, TD75F...
  • Page 33 Contents Engine - 10 [10.001] Engine and crankcase ............. . . 10.1 [10.106] Valve drive and gears .
  • Page 34 Engine - 10 Engine and crankcase - 001 TD65F Without cab, 12x12, TD65F Without cab, 20x12, TD65F Without cab, 12x12, Semi Knock-Down Argentina, TD65F Without cab, 20x12, Semi Knock-Down Argentina, TD75F Without cab, 12x12 , TD75F Without cab, 20x12, TD75F Without cab, 12x12, Semi Knock-Down Argentina, TD75F...
  • Page 35 Contents Engine - 10 Engine and crankcase - 001 TECHNICAL DATA Engine General specification (*) ..............3 Torque (*) .
  • Page 36 Engine - Engine and crankcase Engine - General specification TD65F TD75F TD85F Engine - Torque TD65F TD75F TD85F Angular tightening torque Part to tighten Turnbuckle Tightening torque Angle Head fixing bolts (2), Engine - Sectional view 130 ± 5 ° + 140 ±...
  • Page 37 Engine - Engine and crankcase Crankcase - Service limits TD65F TD75F TD85F BRAG12TRALL0095 a.b Perpendicular positions of dial gauge to measure liner inside diameter c. 70 hp d. 60, 80 and 95 hp C Dimension to obtain after press–fitting and reaming of liner...
  • Page 38 Engine - Engine and crankcase Engine - Sectional view TD65F TD75F TD85F 84574094A 19/10/2016 10.1 [10.001] / 5...
  • Page 39 Engine - Engine and crankcase Engine - Remove TD65F TD75F TD85F DANGER Heavy objects! Lift and handle all heavy components using lifting equipment with adequate capacity. Always support units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
  • Page 40 Engine - Engine and crankcase 6. Remove the exhaust pipe and remove the hood (1). LAIL11TL1110A0A 7. Disconnect the connections (1) from the headlights (2). LAIL11TL1107A0A 8. Remove the shock absorber (1) from the hood. BRAG12TRALL0371 9. Remove the two fixing bolts (1) from the hood support articulations.
  • Page 41 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...

This manual is also suitable for:

Td75fTd85f

Table of Contents