External Hydraulic Power Lift Controls - New Holland T6010 Operator's Manual

EXTERNAL HYDRAULIC POWER LIFT
CONTROLS (where fitted)
An external, rocker type switch (1) is provided on
each rear fender assembly. The switches are of a
three-position design, spring-loaded to return to the
central, off position.
WARNING
Do not stand on or near the implement or between
the implement and tractor when operating the

external hydraulic power lift controls.

Before leaving the tractor to operate the external
switches:
Move the gearshift levers to neutral.
•
Disengage the P.T.O.
•
Apply the parking brake.
•
With the engine running, move the hand throttle lever
to the low idle position (fully rearwards).
WARNING
Before using the external hydraulic power lift
switches, ensure that no person or object is in the
area of the implement or 3-point linkage.
Never operate the external switches while standing:
Directly behind the tractor or tyres.
•
Between the lower links.
•
On or near the implement.
•
WARNING
Never extend arms, legs, any part of the body or any
object into the area near the 3-point linkage or
implement while operating the external switch.
SECTION 3 - - FIELD OPERATION
100
101
3--57