Rear Window; Opening Front Windscreen (Where Fitted) - New Holland T6010 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION

Rear Window

The rear window may be locked in the closed position
or retained in the partially open or fully open
positions.
To open the window, lift the central locking handle (1)
up to the vertical position. Allow the window to open
a little then push the handle down so that the locking
tongue engages the slot (2) in the framework.
Alternatively, the window may be allowed to swing
fully open supported by two gas-filled struts.
IMPORTANT: Retain control of the window when
9
opening it fully. Do not allow it to swing open freely.
Using the grab handle, pull the window closed and
push the handle down to lock the window.

Opening Front Windscreen (where fitted)

The front windscreen may also be locked in the
closed position or retained in the partially open or
fully open positions.
IMPORTANT: Retain control of the window when
opening it fully. Do not allow it to swing open freely.
To close the windscreen, pull on both handles
equally. Push the locking handles down to lock in
position.
10
2--10