Fixed Rim (Type 3); Tobacco Axle (North America Only) - New Holland T6010 Operator's Manual

Fixed Rim (Type 3)

A track adjustment of approximately 50 mm (2.0in.)
each side, may be achieved by interchanging wheel
assemblies.
Track
setting
Figure 225
A
B
NOTE: Depending on rim type, the above settings
may vary by approximately 10.0mm (0.4 in.).
TOBACCO AXLE
(North America only)
If your tractor has the optional Tobacco axle, then the
track settings shown in the table on page 3--129 are
increased by 152 mm (6 in) by the addition of spacers
between the wheels and the rear axle flanges.
When refitting or adjusting a wheel, tighten the bolts
to the following torques then re-check after 50 hours
of operation and thereafter as required.
Disc to hub nuts
Disc to rim nuts
Track
setting
Figure 224
A
B
C
D
E
F
G
H
3--130
SECTION 3 - - FIELD OPERATION
Disc type 3
(18.4 x 38 tyre)
Figure 223
1730 mm (68.1 in.)
1834 mm (72.2 in.)
250 Nm (184 lbf. ft.)
250 Nm (184 lbf. ft.)
Tobacco Axle
34" and 38" Wheels
Figures 221, 222
1564 mm (61.5 in.)
1662 mm (65.4 in.)
1766 mm (69.5 in.)
1862 mm (73.3 in.)
1964 mm (77.3 in.)
2062 mm (81.1 in.)
2166 mm (85.2 in.)
2262 mm (89.0 in.)
A
B
225