Odometer (Distance Record); Area Per Hour Forecaster - New Holland T6010 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION

Odometer (Distance Record)

The odometer provides a visual record of the
distance travelled in kilometres or miles depending
on the ground speed unit selected.
Two displays are available, '1' and '2'. '1' may be
used for individual journey distances and '2' to
provide a total for all journeys travelled. Both '1' and
'2' may be reset to zero.
Touch the key once to select reading '1', touch again
to select reading '2'. Keeping the key depressed for
more than 3 seconds will re--set the selected
odometer to zero.
The journey distance in the display (3) will appear in
steps of:
0 to 19.999 Km/Miles
20 to 199.99 Km/Miles
200 to 1999.9 Km/Miles
2000 to 19999 Km/Miles
NOTE: If the radar option is not installed, distance
calculations are based on axle rotation and are
subject to inaccuracies caused by any wheel slip that
may occur.

Area per Hour Forecaster

Touch the AREA/HOUR key (1). The 'AREA/HOUR'
symbol will display, together with a forecast (2) of the
area that will be worked in one hour if the current rate
of work is continued.
The area per hour will appear in steps of 0.01
Ha/Acre.
NOTE: If the radar option is not installed, area per
hour calculations are based on axle speed and are
subject to inaccuracies caused by any wheel slip that
may occur.
2--58
0.001 Km/Miles
0.01 Km/Miles
0.1 Km/Miles
1.0 Km/Miles
102
103