Changing Call Progress Tones - Polycom SoundPoint IP 200W Provisioning And Configuration Manual

Provisioning and Configuration Guide SoundPoint IP 200W

Changing Call Progress Tones

3 - 18
• Italian (Italiano)
— PereGw_it06_v0790.fwu
— PerePp_it06_v0790.fwu
• Dutch (Nederlands)
— PereGw_nl04_v0790.fwu
— PerePp_nl04_v0790.fwu
• Portuguese (Portuguese)
— PereGw_po08_v0790.fwu
— PerePp_po08_v0790.fwu
• Finnish (Finnish)
— PereGw_sf05_v0790.fwu
— PerePp_sf05_v0790.fwu
You can change the call progress tones played by the phone. North American
tones are selected once you select the country variant in the gateway. If you
select Europe, you will also need to select your country.
To change the country variant:
1. On the handset, press the OK key, then Settings.
2. Press the following keys on the dialpad in this order: 4, 2, 6, 8, and 5.
3. Select Gateway > Country Variant.
4. Select US or EU.
Once you make the selection, the gateway will reboot automatically.
If you selected US, then the North American call progress tones will take effect.
If you selected EU, you must set up the specific European call progress tones
(steps shown below).
To select the European call progress tones:
1. On the handset, press the OK key, then select Settings > System Settings
> Country.
2. Select your desired country.