Polycom SoundPoint IP 200W Provisioning And Configuration Manual page 49

Hide thumbs Also See for SoundPoint IP 200W:
Table of Contents

Advertisement

Name
SIP_STUN_BINDTIME_
GUARD
SIP_STUN_BINDTIME_
DETERMINE
SIP_STUN_KEEP_ALIV
E_TIME
SIP_RTP_PRIORITY
SIP_RTP_PORT_RAN
GE
SIP_RTP_PORT
SIP_SIP_PORT
Telephony Settings
VOIP_SETTINGS_PIN_
CODE
Type
Size
Permitted Values
uint16
1
positive integer,
units in seconds
default is 80
uint8
1
0 = disabled
1 = enabled (default)
uint16
1
positive integer,
units in seconds
default is 90
uint8
1
positive integer
default is 0
uint8
1
positive integer
default is 20
uint16
1
port number
default is 5004
uint16
1
port number
default is 5060
uint8
4
String consisting of 4
ASCII digits in the
range 0-9
default is 456
Interpretation
If STUN is enabled, this value specifies in
seconds how often the system will guard the
NAT bindings. Guarding for NAT bindings
helps the system to react properly if, for
example, the NAT device has been reset.
If this value is 0, no guarding will be made.
Also see
SIP_STUN_BINDTIME_DETERMINE.
If STUN is enabled and
SIP_STUN_BINDTIME_GUARD is defined,
setting this parameter to 1 forces the system
to automatically determining the duration of
NAT bindings in the system. In this case, the
SIP_STUN_BINDTIME_GUARD parameter
defines the initial test duration.
If STUN is enabled,
SIP_STUN_KEEP_ALIVE_TIME defines in
seconds how often keep-alives are sent in
order to keep NAT bindings.
If SIP_STUN_BINDTIME_DETERMINE is
set to 1, SIP_STUN_KEEP_ALIVE_TIME
will be overruled and keep alives will be sent
with a frequency of half of determined
bindtime.
Priority of RTP traffic based on the IP layer
ToS byte. See RFC 1349 for details.
"cost bit" is not supported.
Bit 7..5 defines precedence.
Bit 4..2 defines Type of Service.
Bit 1..0 are ignored.
Setting all three of bit 4..2 will be ignored.
The number of ports that can be used for
RTP audio streaming.
The first RTP port to use for RTP audio
streaming.
Port used for first user agent (UA) instance.
Succeeding UA's will get succeeding ports.
Configures the PIN code protecting the VoIP
settings menus on the handset.
Configuration File
A - 3

Advertisement

Table of Contents
loading

Table of Contents