Table of Contents
Advertisement
10. To force loading of the configuration file, press the OK key from the idle
display, then select Settings > System Settings > Reset Gateway > Yes .
After the gateway is reset, it will pick up the new configuration file from
the boot server. Look at the boot server or web administrator debug log to
ensure the file is being sent.
Warning
When a gateway is reset, any active calls on the SoundPoint IP 200W will suspend
any reboot requests until the there is no active calls. The gateway will automatically
reset 15 seconds after the last call. If the Call light is lit on the gateway, there are
active calls.
When the gateway is reset, it attempts to reload a configuration file each time.
Note
Any settings made on the phone or through the web user interface are overwritten
when a configuration file is loaded.
When the configuration file is loaded and a registration is successfully established,
the VoIP indicator on the gateway turns red. The power indicator and the I-net
indicator on the gateway remain red.
11. Configure the SoundPoint IP200W phone's call groups for inbound calls
and default line for outbound calls by one of the following methods:
Note
By default, the SoundPoint IP 200W allows any phone to register to the gateway
during the 5 minute registration interval when the reset button is pressed on the
back of the gateway.
Method 1: Manual Configuration of Call Groups and Default Line
From the idle display, press the OK key, select the Settings menu, and
a
then press the OK key again.
Select Telephony settings, press the OK key, select Call Groups, and
b
then press the OK key again.
Nicknames for the VoIP (and landline) accounts are listed.
The configuration setting
SUBSCR_0_SIP_UA_DATA_SIP_NAME_ALIAS sets the nicknames.
Refer to
Select the VoIP lines that you want the current handset to receive calls
c
on, and then press the OK key.
Press the End Call key.
d
Repeat step c for the VoIP lines that you want to the current handset
e
to place calls on, and then press the OK key.
Configuration File
on page A-1.
Setting up Your System
3 - 9
Advertisement
Table of Contents
