Polycom SoundPoint IP 200W Provisioning And Configuration Manual page 58

Provisioning and Configuration Guide SoundPoint IP 200W
Name
BRIDG_TIMEOUT_BRI
DG
BRIDG_PSTN_PIN_1
BRIDG_PSTN_PIN_2
BRIDG_PSTN_PIN_3
BRIDG_PSTN_PREDE
FINED_NR
BRIDG_SIP_PSTN_PIN
_PROT
BRIDG_SIP_PIN_1
BRIDG_SIP_PIN_2
BRIDG_SIP_PIN_3
BRIDG_SIP_PREDEFI
NED_NR
BRIDG_UA
Voice Subscriptions - Eight separate VoIP accounts can be set up. All accounts will attempt to register to
the Voice Server unless the SIP username is left blank. Each of the parameters below can be set
individually for all accounts. The parameter names for account 0 are shown.
SUBSCR_0_SIP_UA_D
ATA_SIP_NAME
SUBSCR_0_SIP_UA_D
ATA_VOICE_MAILBOX
_NUMBER
SUBSCR_0_UA_DATA
_DISP_NAME
A - 12
Type Size Permitted Values
uint8 1 0 = disabled
(default)
1 = enable
uint8 4 PIN code
default is Null
uint8 4 PIN code
default is Null
uint8 4 PIN code
default is Null
uint8 22 phone number
default is0x00
uint8 1 0 = disable (default)
1 = enable
uint8 4 PIN code
default is Null
uint8 4 PIN code
default is Null
uint8 4 PIN code
default is Null
uint8 22 phone number
default is0x00
uint8 1 positive integer
default is 0
uint8 36 phone number,
double quoted
default is 0
uint8 22 mailbox phone
number, double
quoted
default is 0
uint8 20 string, double
quoted
default is Null
Interpretation
If set to 1, timeout before bridging is
enabled.
The PIN code for bridging from PSTN to SIP
1.
The PIN code for bridging from PSTN to SIP
2.
The PIN code for bridging from PSTN to SIP
3.
Predefined number to dial on PSTN when
bridging from SIP to PSTN.
Enable or disable pin protection for bridging
from SIP to PSTN.
The PIN code for bridging from SIP to PSTN
1.
The PIN code for bridging from SIP to PSTN
2.
The PIN code for bridging from SIP to PSTN
3.
Predefined number to dial on SIP when
bridging from PSTN to SIP.
The user agent used when the bridged call
from the PSTN to SIP dialled.
Address of Record / Line Port.
The phone number for the voicemail on this
account.
The SIP display name. This name is
displayed as the remote end caller ID when
outbound calls are made.