Gateway - Polycom SoundPoint IP 200W Provisioning And Configuration Manual

Provisioning and Configuration Guide SoundPoint IP

Gateway

Symptom
The gateway I-net indicator is not
lit.
4 - 8
Problem
The SoundPoint IP 200W phone
has no power.
The Ethernet connection from
the gateway is broken.
Corrective Action
Verify Ethernet cable is connected:
• Check that the Ethernet cable
between the WAN port on the
gateway and the LAN port on your
modem or router is connected
properly.
Verify the modem or router is connected:
• Check that the batteries are inserted
with the plus and minus ends facing
the correct way. Press and hold the
End Call key.
Verify the gateway can retrieve an IP
address:
• In Network settings, check that the
IP mode corresponds to the IP mode
of your Internet connection.