Oil Seal Inspection; Oil Seal Removal And Installation - Suzuki RM-Z450 Owner's Service Manual

10-8 TRANSMISSION AND CRANKSHAFT

OIL SEAL INSPECTION

• Inspect each oil seal lip for wear and damage.
• If any defects are found, replace the oil seal with a new one.

OIL SEAL REMOVAL AND INSTALLATION

• Remove the oil seals ( 1, 2, 3, 4) with the special tool.
The removed oil seal should be discard.
" 09913-50121: Oil seal remover
• Fit each new oil seal with the special tools.
" 09913-70210: Bearing installer set
Oil seal 1, 4: $ 47 Attachment
Oil seal 2: $ 22 Attachment
Oil seal 3: $ 17 Attachment
• Apply grease to each oil seal lip.
% 99000-25010: SUZUKI SUPER GREASE "A"
NOTE:
Be sure to check the direction of the crankshaft bearing oil seal
4 before fitting them.
CAUTION
or equivalent
PRIMARY
DRIVE
GEAR
SIDE