Suzuki RM-Z450 Owner's Service Manual page 157

9-6 GEARSHIFTING
• With the pawls held in pushed position, install the pawl lifter
0.
• Install the gearshift cam driven gear and pawl lifter.
• Apply THREAD LOCK SUPER to the screws.
• Tighten the screws.
$ 99000-32030: THREAD LOCK SUPER "1303"
• Install the gearshift return spring B, snap ring C and shim D
to the gearshift shaft A properly.
Replace the snap ring with a new one.
NOTE:
When installing the return spring, position the stopper F of
gearshift arm between the return spring ends E.
" 09900-06107: Snap ring pliers
• Align the center teeth on the gearshift shaft with the center
teeth on the gearshift cam driven gear.
NOTE:
Pinch the gearshift arm stopper G with return spring ends H.
• Install the oil pump No.1 assembly. (!11-6)
• Install the clutch assembly and right crankcase cover.
(!7-10, 8-6)
or equivalent
CAUTION