Suzuki RM-Z450 Owner's Service Manual page 149

8-6 KICK STARTER
• Install the shim 8 and spring 9 to the kick starter shaft.
• Install the kick starter shaft assembly to the crankcase.
NOTE:
Securely engage the stopper portion C of the kick starter with
the stopper guide D.
• Install the end of return spring to the crankcase.
• Install the kick starter idle gear 0.
• Reassemble the clutch assembly. (!7-10)
• Install the dowel pins and gasket A.
Use a new gasket A to prevent oil leakage.
• Install the right crankcase cover B.
Use the new gasket washers E to prevent oil leakage.
# Right crankcase cover bolt: 11 N·m (1.1kgf-m, 8.0 lb-ft)
CAUTION
CAUTION