Installation - Suzuki RM-Z450 Owner's Service Manual

INSTALLATION

Install the gearshift in the reverse order of removal. Pay atten-
tion to the following points:
• Install the washer 1, spring 2 and gearshift cam stopper 3.
NOTE:
Install the spring 2 to the hole A.
# Shift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Align the pin groove B with the pin C when installing the
stopper plate 4.
• Tighten the gearshift cam driven pin 5 to the specified
torque.
# Gearshift cam driven pin: 24 N·m (2.4 kgf-m, 17.5 lb-ft)
• Fit the springs 6, pins 7 and pawls 8 to the gearshift cam
driven gear 9. Wider side D of pawl should be positioned
outside.
GEARSHIFTING 9-5