10-16
TRANSMISSION AND CRANKSHAFT
• Apply grease to Oil seal lip and O-rings 5.
% 99000-25010: SUZUKI SUPER GREASE "A"
Replace the O-rings with new ones.
• Fit the O-rings 5 and spacer 6 to the driveshaft.
PRIMARY DRIVE GEAR INSTALLATION
• Install the cam chain and cam chain tensioner.
(!6-24)
• Install the magneto rotor and key. (!14-12)
• Apply grease to oil seal lip.
% 99000-25010: SUZUKI SUPER GREASE "A"
• Install the primary drive gear 1 and washer 2.
NOTE:
The washer is directional. Assemble the washer 2 as shown in
the illustration.
• Apply THREAD LOCK SUPER to the primary drive gear nut
3.
( 99000-32110: THREAD LOCK SUPER "1322"
• Hold the magneto rotor with the special tool and tighten the
primary drive gear nut 3 to the specified torque.
" 09930-44560: Rotor holder
' Primary drive gear nut: 90 N·m (9.0 kgf-m, 65.0 lb-ft)
CAUTION
or equivalent
or equivalent
or equivalent