Piston And Piston Ring Removal - Suzuki RM-Z450 Owner's Service Manual

6-6 CYLINDER HEAD, CYLINDER AND PISTON
• Remove the cylinder gasket 2 and dowel pins.

PISTON AND PISTON RING REMOVAL

• Remove the cylinder. (!6-5)
• Place a clean rag over the cylinder base to prevent the piston
pin circlip 1 from dropping into the crankcase.
• Remove the piston pin circlip 1.
• Remove the piston pin 2 and piston 3.
• Carefully spread the ring opening with your thumbs and then
push up the opposite side of the ring 4 to remove it.
• Remove the oil ring in the same procedure.