Installation - Suzuki RM-Z450 Owner's Service Manual

14-12 ELECTRICAL SYSTEM

INSTALLATION

• Remove any grease from the tapered portion A of the mag-
neto rotor and crankshaft B.
• Fit the magneto rotor key 1 into the crankshaft.
• Install the magneto rotor.
• Tighten the magneto rotor nut to the specified torque with a
special tool.
' Magneto rotor nut: 80 N·m (8.0 kgf-m, 58.0 lb-ft)
! 09930-44560: Rotor holder
• Install the dowel pins.
• Replace the gasket 2 with a new one.
• Install the magneto cover 3.
Install the new gasket washers to the bolt A.
' Magneto cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Install the gearshift lever. ("9-7)
• Install the left front protector.
• Pour the engine oil. ("2-11)
CAUTION