Suzuki RM-Z450 Owner's Service Manual page 137

7-8 CLUTCH
• Install the clutch springs and clutch spring set bolts.
• Hold the clutch housing with the special tool.
Be careful not to damage the clutch housing or clutch
plates.
" 09920-53740: Clutch sleeve hub holder
• Tighten the clutch spring set bolts to the specified torque.
NOTE:
Tighten the clutch spring set bolts diagonally.
% Clutch spring set bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Replace the gasket 8 with a new one.
• Fit the clutch cover 9 and bolts. Tighten the clutch cover
bolts diagonally.
% Clutch cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Install the brake pedal. (!16-18)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (!2-11)
• Clutch cable play (!2-15)
• Smooth operation of clutch assembly
CAUTION