Disc Plate Replacement - Suzuki RM-Z450 Owner's Service Manual

NOTE:
* Install the left side (sprocket side) bearing first and then install
the spacer and right side bearing.
* After installing the bearings, inspect the bearings for smooth
movement.
• Install the snap ring 1.
" 09900-06108: Snap ring pliers
• Fit the dust seals and apply grease to their lips.
NOTE:
When installing the dust seal, place the manufacturer's code
indicated side of the dust seal outside.
" 09913-70210: Bearing installer set
Oil seal: #42 Attachment
$ 99000-25010: SUZUKI SUPER GREASE "A"

DISC PLATE REPLACEMENT

• Remove the disc plate.
• Apply THREAD LOCK SUPER to the bolts.
% 99000-32110: THREAD LOCK SUPER "1322"
• Tighten the bolts to the specified torque.
& Disc plate bolt: 25 N·m (2.5 kgf-m, 18.0 lb-ft)
Left
or equivalent
or equivalent
FRONT AND REAR WHEELS
Clearance
Spacer
15-11
Right