Suzuki RM-Z450 Owner's Service Manual page 170

INSTALLATION
• Press the new bearings with the special tools.
Bearing 1: $ 55 Attachment
Bearing 2, 8: $ 42 Attachment
Bearing 3, 6: $ 72 Attachment
Bearing 4: $ 40 Attachment
Bearing 5: $ 52 Attachment
Bearing 7: $ 37 Attachment
Bearing 9: $ 15 Attachment
" 09913-70210: Bearing installer set
• Press the bearing 0 with the appropriate steel rod.
NOTE:
Press the bearings ( 2 and 8) into the crankcase, so that the
sealed side A faces outside of the crankcase.
NOTE:
Press the bearings ( 1, 3 and 6) into the crankcase, so that
the stepped side C faces inside of the crankcase.
• Apply THREAD LOCK SUPER to the bearing retainer screws.
& 99000-32030: THREAD LOCK SUPER "1303"
• Tighten the its screws.
B Outside of the crankcase
D Inside of the crankcase
or equivalent
TRANSMISSION AND CRANKSHAFT 10-11