Uninterruptible power supply LEDs
The Powerware uninterruptible power supply (UPS) front panel has the LEDs shown in
on Powerware 9125 UPS,
Figure 10: LEDs on Powerware 9125 UPS
ledlups KLC 030102
Figure notes
1
Normal mode indicator
2
Battery mode indicator
3
Bypass mode indicator
4
Test/Alarm reset button
After plugging in the UPS, all the LEDs flash briefly. After a self test, the Normal mode LED flashes,
indicating that the UPS is in Standby mode.
For more information on the LEDs, see the UPS user's guide that comes with the Powerware UPS.
IPSI LEDs
The TN2312BP Internet Protocol Server Interface (IPSI) circuit pack LEDs are shown in
TN2312BP circuit pack faceplate,
whether its IP address is dynamic (shows media gateway location) or static (shows I P). See
LED display on the IPSI circuit pack—static address,
Installing and Configuring the Avaya S8700 or S8710 Media Server
June 2004
on page 77:
1
2
3
5
6
7
8
on page 78). It also has a programmable LED display to indicate
Testing the media server installation
4
5
Off button
On button
Bar graph indicators
Alarm indicators
on page 79.
7
LED indicators
Figure 10, LEDs
8
7
6
Figure 11,
Figure 12,
77