Administrative Requirements Prior To Mfp Http Setup; Mfp Specific Requirements; Setting Mfp Date/Time Settings - Konica Minolta bizhub PRO 950 Setup Instructions

A: Administrative Requirements Prior to MFP HTTP Setup
The MFP's HTTP settings and Server addresses MUST be obtained prior to
setting up the MFP for HTTP Communication.
Please use your setup credentials provided by your vCare Administrator.
B: MFP Specific Requirements
The technician performing the HTTP setup must have the following information from
the vCare administrator before visiting the customer:
1. Device ID: The Device ID for MFP must match the 13 digit ID configured on
CSRC Server. The Device ID is the serial number for the MFP. This setting is
hard-coded in the bizhub Pro 950's vCare/CSRC settings
2. Center ID: This ID is used by the vCare/CSRC Communication Server.
3. WEB/DAV Server IP Address: The IP address for the WEB/DAV Server.
4. HTTP Port: Typically 80, unless otherwise indicated.
5. Service Engineer's ID number: The SE ID is a seven-digit number. It should be
unique to the technician servicing the machine.
Note: Enter leading zeros if required; e.g. 0123456. If no numeric ID assigned,
simply use: 1234567.
C: Setting MFP Date/Time Settings
1. Press the Utility / Counter button on the MFP.
2. Select [Administrator Setting].
Konica Minolta bizhub PRO 950 Main Body bizhub vCare One Way HTTP Setup Guide
Page 2 of 26