Ethernet Port Statistics; Table 6 Home - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide
The following table describes the labels in this screen.

Table 6 Home

LABEL
System up Time
The following fields are related to the Ethernet ports.
ENET
Port Name
Media
Duplex
Up Time
The following fields are related to the ADSL ports.
xDSL
Status
Mode
Up/Down stream
Interleave/Fast
Up Time
The following fields and buttons apply to the whole screen.
Poll Interval(s)
Stop
Clear Counter

6.2.1 Ethernet Port Statistics

In the Home screen, click an Ethernet port's number to display that port's statistics screen as
shown next.
64
DESCRIPTION
This field shows how long the system has been running since the last time it was
started.
This field displays the number of the Ethernet port. Click a port number to display
that port's statistics screen (refer to 9.2.1).
This field displays the name of the Ethernet port.
This field displays the speed and the type of media that this Ethernet port is using
for a connection (100copper or 10copper). "-" displays when the port is disabled
or not connected.
This field displays whether the port is using half or full-duplex communication. "-"
displays when the port is disabled or not connected.
This field shows the total amount of time in hours, minutes and seconds the port's
connection has been up. "--:--:--" displays when the port is disabled or not
connected.
This identifies the ADSL port. Click a port number to display the ADSL Port
Statistics screen (refer to
This field shows whether the port is connected (Up) or not (Down).
This field shows which ADSL operational mode the port is set to use. "-" displays
when the port is not connected.
This field shows the number of kilobytes per second that a port is set to transmit
and receive.
This field shows the port's ADSL latency mode (fast or interleave).
This field shows the total amount of time in hours, minutes and seconds the port's
connection has been up. "-" displays when the port is not connected.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to halt system statistic polling.
Select a port from the Port drop-down list box and then click Clear Counter to
erase the recorded statistical information for that port.
Section 6.2.2 on page 67).
Chapter 6 Home and Port Statistics Screens