Installation Scenario B; Figure 12 Installation Scenario A - ZyXEL Communications AAM1212 User Manual

Figure 12 Installation Scenario A

3.1.9.1.1 Procedure To Connect To An MDF
1 Connect the Telco-50 connector end of the cable to the Telco-50 connector.
2 Connect the USER wiring on the other end of the Telco-50 cable to the upper ports of the
MDF using a punch-down tool.
3 Connect the telephone wiring from each end-user's DSL modem to the lower ports of the
MDF.

3.1.9.2 Installation Scenario B

Phone service is available. There is one MDF from which end-users CO connections are made
(see next figure).
Chapter 3 Hardware Connections
AAM1212 User's Guide
43