ZyXEL Communications AAM1212 User Manual page 177

AAM1212 User's Guide
Table 58 Commands (continued)
COMMAND
pktfilter
dot1x
176
show
[portlist]
enable
<portlist>
disable
<portlist>
set <portlist>
<count>
filter show [portlist]
enable
<portlist>
disable
<portlist>
set <port>
<mac> [<mac>
<mac> ...]
delete <port>
<mac> [<mac>
<mac> ...]
show [portlist]
set <portlist>
[pppoe|ip|arp|n
etbios|dhcp|eap
ol|igmp|none]
pppoeonly <portlist>
show [portlist]
enable
disable
auth <profile|radius
>
port
enable
<portlist>
DESCRIPTION
Displays the system's current MAC
address count settings.
Turns on the MAC address count filter
for a port(s).
Turns off the MAC address count filter
for a port(s).
Sets the MAC address count filter for a
port(s).
Displays MAC filter settings.
Turns on the MAC filter for a port(s).
Turns off the MAC filter for a port(s).
Adds a MAC filter MAC entry.
Removes a MAC filter MAC entry.
See Section 28.13 on page 240
how to configure packet filters.
Displays packet type filter settings.
Sets the packet type filter for a specific
port.
none accepts all packets. This
command disables the pktfilter
pppoeonly <portlist>
command.
Uses this command to allow only
PPPoE traffic. It drops any non-
PPPoE packets.
This command disables the
pktfilter set <portlist>
[pppoe|ip|arp|netbios|dhc
p|eapol|igmp|none]
Displays IEEE 802.1X settings.
Turns on IEEE 802.1X.
Turns off IEEE 802.1X.
Sets IEEE 802.1X to use the local
profiles or an external RADIUS server
for authentication.
Turns on IEEE 802.1X for specific
ports.
Chapter 25 Commands Overview
for
command.