Table of Contents
Advertisement
AAM1212 User's Guide
The following example displays the MAC filtering status and the fixed source MAC addresses
on ADSL port 5.
Figure 144 MAC Filter Show Command Example
ras> switch mac filter show 5
status:V, only listed MACs can pass through this port.
status:-, every MAC can pass this port.
port status mac
---- ------ -----------------
5
28.11.2 MAC Filter Enable Command
Syntax:
switch mac filter enable <portlist>
where
<portlist>
This command turns on the MAC filtering feature on the specified ADSL port(s) or on all
ADSL ports if no port is specified.
The following example turns on the MAC filtering feature on ADSL port 5.
Figure 145 MAC Filter Enable Command Example
ras> switch mac filter enable 5
28.11.3 MAC Filter Disable Command
Syntax:
switch mac filter disable <portlist>
236
V
00:00:00:00:00:29
00:00:00:00:00:2a
00:00:00:00:00:2b
00:00:00:00:00:2c
00:00:00:00:00:2d
00:00:00:00:00:2e
00:00:00:00:00:2f
00:00:00:00:00:30
00:00:00:00:00:31
00:00:00:00:00:32
=
You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
Chapter 28 Switch Commands
Advertisement
Table of Contents
Troubleshooting
