Chapter 26 Sys Commands; Sys Commands Summary - ZyXEL Communications AAM1212 User Manual

This chapter describes the commonly used commands that belong to the sys (system) group of
commands.

26.1 Sys Commands Summary

The following table lists the
Table 59 Sys Commands
COMMAND
sys
info
passwd
reboot
snmp
server

Chapter 26 Sys Commands

commands you can use with the AAM.
sys
show
hostname <hostname>
location <location>
contact <contact>
[show|sec|can
cel]
show
getcommunity <community>
setcommunity <community>
trapcommunity <community>
trustedhost <ip>
trapdst <ip> [<port>]
show
C
H A P T E R
Sys Commands
DESCRIPTION
Displays general system information.
Sets the system name.
Sets location information.
Sets contact person information.
Sets the system's administrator
password.
Sets the reboot timer or displays the
timer and remaining time for reboot. If
a reboot has been scheduled, use
cancel
Displays SNMP settings.
Sets the SNMP GetRequest
community.
Sets the SNMP SetRequest
community.
Sets the SNMP Trap community.
Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not send
any SNMP traps.
Displays the device's service status
and port numbers.
AAM1212 User's Guide
2 6
to prevent a reboot.
181