Table of Contents
Advertisement
AAM1212 User's Guide
Figure 55 VLAN Status
The following table describes the labels in this screen.
Table 26 VLAN Status
LABEL
Static VLAN
Setting
VLAN Port
Setting
The Number Of
VLAN
Page X of X
The first table displays the names of the fields. The subsequent tables show the settings of the VLANs.
Index
Status
Name / VID
1~12, enet1,
enet2
Elapsed Time
Poll Interval(s)
Stop
Change Pages
114
DESCRIPTION
Click Static VLAN Setting to configure ports to dynamically join a VLAN group or
permanently assign ports to a VLAN group or prohibit ports from joining a VLAN
group.
Click VLAN Port Setting to specify Port VLAN IDs (PVIDs).
This is the number of VLANs configured on the AAM.
This identifies which page of VLAN status information is displayed and how many
total pages of VLAN status information there are.
This is the VLAN index number.
This field shows how this VLAN was added to the AAM; dynamically using GVRP or
statically, that is, added as a permanent entry.
The name identifies an individual VLAN. The vid is the PVID, the Port VLAN ID
assigned to untagged frames or priority-tagged frames received on this port.
These columns display the VLAN's settings for each port. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked
as "-".
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
The text box displays how often (in seconds) this screen refreshes. You may change
the refresh interval by typing a new number in the text box and then clicking Set
Interval.
Click Stop to halt polling statistics.
Click Previous Page or Next Page to show the preceding/following screen if the
information cannot be displayed in one screen.
Chapter 9 VLAN
Advertisement
Table of Contents
Troubleshooting
