AAM1212 User's Guide
This command allows the configuration of a PVC (permanent virtual circuit) for one or a
range of ADSL ports.
The following example sets a PVC on ADSL port 1 with VPI 1, VCI 34, default VID 100
priority 3 and the DEFVAL_VC profile.
Figure 124 PVC Set Command Example
ras> adsl pvc set 1 1 34 100 3 DEFVAL_VC
27.5.3 PVC Delete Command
Syntax:
adsl pvc delete <portlist> <vpi> <vci>
where
<portlist>
[<vpi> <vci>]
This command deletes the specified PVC channel.
214
=
You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
=
The VPI and VCI of an individual PVC.
Chapter 27 ADSL Commands