General Ip Commands; Show Command; Ping Command; Route Set Command - ZyXEL Communications AAM1212 User Manual

Table 62 IP Commands (continued)
COMMAND
ping
showall

29.4 General IP Commands

The following shows general IP commands that help with the management of the IP
parameters.

29.4.1 Show Command

Syntax:
ras> ip show
Use the command to display the current management IP settings.

29.4.2 Ping Command

Syntax:
ras> ip ping <ip> [count]
where
<ip>
[count]
This is an IP facility to check for network functionality by sending an echo request to another
IP host and waiting for the reply.

29.4.3 Route Set Command

Syntax:
ras> ip route set <dst ip>[/netmask] <gateway ip> [metric] <name>
Chapter 29 IP Commands
default
<gateway ip>
<metric>
delete <dst ip>[/
netmask]
flush
<ip> [count]
[nopause]
= The IP address of the target.
= The number of pings you want the AAM to send
AAM1212 User's Guide
DESCRIPTION
Sets the AAM's default route.
Removes a routing table entry.
Clears the routing table.
Pings a remote host.
Displays all IP configuration.
245