Figure 154 Packet Filter Set Command Example - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide
This command sets the packet type filter for the specified ADSL port(s).
The following example sets ADSL port 9 to reject ARP, PPPoE and IGMP packets.

Figure 154 Packet Filter Set Command Example

ras> switch pktfilter set 9 arp pppoe igmp
242
Reject EAPol packets. EAP (Extensible Authentication
[eapol]
Protocol, RFC 2486) over LAN. EAP is used with IEEE 802.1x to
allow additional authentication methods (besides RADIUS) to be
deployed with no changes to the access point or the wireless clients.
Reject IGMP packets. Internet Group Multicast Protocol is
[igmp]
used when sending packets to a specific group of hosts.
Accept all packets.
[none]
Chapter 28 Switch Commands