Table of Contents
Advertisement
AAM1212 User's Guide
Figure 46 Port Profile
The following table describes the fields in this screen.
Table 18 Port Profile
LABEL
VC Profile
Alarm Profile
IGMP Filter Profile Click IGMP Filter Profile to open the IGMP Filter Profile screen where you can
Index
Name
Latency Mode
Down/Up Stream
Rate (kbps)
Modify
Delete
The rest of the screen is for profile configuration.
Name
94
DESCRIPTION
Click VC Profile to open the VC Profile screen where you can configure virtual
channel profiles.
Click Alarm Profile to open the Alarm Profile screen where you can configure
limits that trigger an alarm when exceeded.
configure IGMP multicast filter profiles.
This is the port profile index number.
These are the names of individual profiles. The DEFVAL profile always exists and
all of the DSL ports have it assigned to them by default. You can use up to 31
ASCII characters; spaces are not allowed.
This is the ADSL latency mode (Fast or Interleave) for the ports that belong to this
profile.
These are the maximum downstream and upstream transfer rates for the ports that
belong to this profile.
Select a profile's Select radio button and click Modify to edit the profile.
Select a profile's Select radio button and click Delete to remove the profile.
When editing a profile, this is the name of this profile. When adding a profile, type a
name (up to 31 characters) for the profile.
Chapter 8 ADSL Port Setup
Advertisement
Table of Contents
Troubleshooting
