Table 59 Sys Commands - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide
Table 59 Sys Commands (continued)
COMMAND
client
syslog
time
date
timeserver
182
enable <telnet|ftp|web
|icmp>
disable <telnet|ftp|web
|icmp>
port <telnet|ftp|web
> <port>
show
enable <index>
disable <index>
set <index> <start
ip> <end ip>
[[telnet] [ftp]
[web] [icmp]]
show
enable
disable
server <ip>
facility <facility>
show
set <hh> [<mm>
[ss]]
show
set <yyyy mm dd>
show
set <none>
<daytime|time|n
tp> <ip>
<utc[<+|-
>0100~1200]>
[nosync]
DESCRIPTION
Turns on a service.
Turns off a service.
Sets a port for a service.
Displays the device's secured client
settings.
Allows a secured client set to manage
the device.
Stops a secured client set from
managing the device.
Sets a secured client set: a range of IP
addresses from which you can
manage the device and the protocols
that can be used.
The syslog feature sends logs to an
external syslog server.
Displays the syslog settings.
Turns on the syslog logging.
Turns off the syslog logging.
Sets the IP address of the syslog
server.
Set the log facility (1~7) to log the
syslog messages to different files in
the syslog server. See your syslog
program's documentation for details.
Displays the system's current time.
Sets the system's time.
Displays the system's current date.
Sets the system's date.
Displays the system's time server.
Sets the system to not use a time
server.
Sets the time service protocol, time
server's IP address and the device's
time zone.
Chapter 26 Sys Commands