where
<profile>
This command allows you to delete an individual ADSL alarm profile by its name. You cannot
delete the DEFVAL alarm profile.
The following example deletes the SESalarm alarm profile.
Figure 120 Alarm Profile Delete Command Example
ras> adsl alarm profile delete SESalarm
27.3.17 Alarm Profile Map Command
Syntax:
adsl alarmprofile map <portlist> <profile>
where
<portlist>
<profile>
Sets the AAM to use an (already configured) alarm profile with the specified ADSL ports.
The following example sets the AAM to use the SESalarm alarm profile with ADSL port 5.
Figure 121 Alarm Profile Map Command Example
ras> adsl alarmprofile map SESalarm 5
27.3.18 Alarm Profile Showmap Command
Syntax:
adsl alarmprofile showmap [profile]
where
[profile]
Chapter 27 ADSL Commands
=
The name of an alarm profile.
=
You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
=
The name of an alarm profile.
=
The name of an alarm profile.
AAM1212 User's Guide
209