Cisco Small Business 200 Series Administration Manual page 99

Administration: Discovery
Configuring LLDP
The LLDP Neighbor Information page contains the following fields:
Port Details
• Local Port—Port number.
• MSAP Entry—Device Media Service Access Point (MSAP) entry number.
Basic Details
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• Port Description—Information about the port, including manufacturer, product name and hardware/
software version.
• System Name—Name of system that is published.
• System Description—Description of the network entity (in alpha-numeric format). This includes the
system name and versions of the hardware, operating system, and networking software supported by
the device. The value equals the sysDescr object.
• Supported System Capabilities—Primary functions of the device. The capabilities are indicated by
two octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP, Router, Telephone, DOCSIS
cable device, and station, respectively. Bits 8 through 15 are reserved.
• Enabled System Capabilities—Primary enabled function(s) of the device.
Management Address Table
• Address Subtype—Managed address subtype; for example, MAC or IPv4.
• Address—Managed address.
• Interface Subtype—Port subtype.
• Interface Number—Port number.
MAC/PHY Details
• Auto-Negotiation Supported—Port speed auto-negotiation support status. The possible values are
True and False.
• Auto-Negotiation Enabled—Port speed auto-negotiation active status. The possible values are True
and False.
Cisco Small Business 200 Series Smart Switch Administration Guide
9
98