Cisco Small Business 200 Series Administration Manual page 10

Getting Started
Starting the Web-based Configuration Utility
Logging In
The default username is cisco and the default password is cisco. The first time that you log in with the
default username and password, you are required to enter a new password.
NOTE
The languages loaded into the device have a language and country code (en-US, en-GB and so on). For the
Login page to be automatically displayed in a particular language, based on the browser request, both the
language and country code of the browser request must match those of the language loaded on the device.
If the browser request contains only the language code without a country code (for example: fr). The first
embedded language with a matching language code is taken (without matching the country code, for
example: fr_CA).
To log in to the device configuration utility:
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
When the login attempt is successful, the Getting Started page appears.
If you entered an incorrect username or password, an error message appears and the Login page remains
displayed on the window. If you are having problems logging in, please see the
Configuration Utility
Cisco Small Business 200 Series Smart Switch Administration Guide
If you have not previously selected a language for the GUI, the language of the Login
page is determined by the language(s) requested by your browser and the
languages configured on your device. If your browser requests Chinese, for
example, and Chinese has been loaded into your device, the Login page is
automatically displayed in Chinese. If Chinese has not been loaded into your
device, the Login page appears in English.
Enter the username/password. The password can contain up to 64 ASCII
characters. Password-complexity rules are described in
Complexity Rules.
If you are not using English, select the desired language from the Language drop-
down menu. To add a new language to the device or update a current one, see
Upgrade/Backup
If this is the first time that you logged on with the default user ID (cisco) and the
default password (cisco) or your password has expired, the Change Password
Page appears. See
Choose whether to select Disable Password Complexity Enforcement or not.
For more information on password complexity, see the
Complexity Rules
Enter the new password and click Apply.
section in the Administration Guide for additional information.
Firmware/Language.
Password Expiration
section.
Setting Password
for additional information.
Setting Password
Launching the
2
9