Cisco Small Business 200 Series Administration Manual page 167

Smartport
Built-in Smartport Macros
#macro key description:
#
#
#Default Values are
#$native_vlan = Default VLAN
#$voice_vlan = 1
#$max_hosts = 10
#
#the default mode is trunk
smartport switchport trunk allowed vlan add $voice_vlan
smartport switchport trunk native vlan $native_vlan
#
port security max $max_hosts
port security mode max-addresses
port security discard trap 60
#
smartport storm-control broadcast level 10
smartport storm-control include-multicast
smartport storm-control broadcast enable
#
spanning-tree portfast
#
@
no_ip_phone
[no_ip_phone]
#macro description no ip_phone
#macro keywords $voice_vlan
#
#macro key description:
#
#Default Values are
#$voice_vlan = 1
#
smartport switchport trunk allowed vlan remove $voice_vlan
no smartport switchport trunk native vlan
smartport switchport trunk allowed vlan remove all
#
no port security
no port security mode
no port security max
#
no smartport storm-control broadcast enable
no smartport storm-control broadcast level
no smartport storm-control include-multicast
#
spanning-tree portfast auto
#
@
Cisco Small Business 200 Series Smart Switch Administration Guide
$native_vlan: The untag VLAN which will be configured on the port
$voice_vlan: The voice VLAN ID
$max_hosts: The maximum number of allowed devices on the port
$voice_vlan: The voice VLAN ID
12
166