Cisco Small Business 200 Series Administration Manual page 306

Security: Secure Sensitive Data Management
Configuring SSD
- Secure—Indicates that this rule applies only to secure channels (console, SCP, SSH and HTTPS),
not including the SNMP and XML channels.
- Insecure—Indicates that this rule applies only to insecure channels (Telnet, TFTP and HTTP), not
including the SNMP and XML channels.
- Secure XML SNMP—Indicates that this rule applies only to XML over HTTPS and SNMPv3 with
privacy.
- Insecure XML SNMP—Indicates that this rule applies only to XML over HTTP or and SNMPv1/
v2and SNMPv3 without privacy.
• Read Permission—The read permissions associated with the rule. These can be the following:
- Exclude—Lowest read permission. Users are not permitted to get sensitive data in any form.
- Plaintext Only—Higher read permission than above ones. Users are permitted to get sensitive
data in plaintext only.
- Encrypted Only—Middle read permission. Users are permitted to get sensitive data as encrypted
only.
- Both (Plaintext and Encrypted)—Highest read permission. Users have both encrypted and
plaintext permissions and are permitted to get sensitive data as encrypted and in plaintext
• Default Read Mode—All default read modes are subjected to the read permission of the rule. The
following options exist, but some might be rejected, depending on the rule's read permission.
- Exclude—Do not allow reading the sensitive data.
- Encrypted—Sensitive data is presented encrypted.
- Plaintext—Sensitive data is presented as plaintext.
STEP 3
STEP 4
• Add, Edit or Delete rules
• Restore to Default—Restore a user-modified default rule to the default rule.
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Apply. The settings are saved to the Running Configuration file.
The following actions can be performed on selected rules:
22
305