Etherlike Statistics - Cisco Small Business 200 Series Administration Manual

Status and Statistics

Etherlike Statistics

• Interface—Select the type of interface and specific interface for which Ethernet statistics are to be
displayed.
• Refresh Rate—Select the time period that passes before the interface Ethernet statistics are
refreshed.
The Receive Statistics area displays information about incoming packets.
• Total Bytes (Octets)—Octets received, including bad packets and FCS octets, but excluding framing
bits.
• Unicast Packets—Good Unicast packets received.
• Multicast Packets—Good Multicast packets received.
• Broadcast Packets—Good Broadcast packets received.
• Packets with Errors—Packets with errors received.
The Transmit Statistics area displays information about outgoing packets.
• Total Bytes (Octets)—Octets transmitted, including bad packets and FCS octets, but excluding
framing bits.
• Unicast Packets—Good Unicast packets transmitted.
• Multicast Packets—Good Multicast packets transmitted.
• Broadcast Packets—Good Broadcast packets transmitted.
To clear or view statistics counters:
• Click Clear Interface Counters to clear counters for the interface displayed.
• Click View All Interfaces Statistics to see all ports on a single page.
Etherlike Statistics
The Etherlike page displays statistics per port according to the Etherlike MIB standard definition. The
refresh rate of the information can be selected. This page provides more detailed information regarding
errors in the physical layer (Layer 1) that might disrupt traffic.
To view Etherlike Statistics and/or set the refresh rate:
Cisco Small Business 200 Series Smart Switch Administration Guide
3
19